Filament - SODIALRNew 3D Printer Filament ABS/PLA 1.75mm/3.0mm for 3D Printer 1kg/2.2lbs Material:PLA Size:1.75mm Color:Silver

This is the best filament on the market. The 1.75mm filament holds a diameter tolerance of 0.02mm/0.0008 which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1kg 2.2lb reel. We tested many filaments at both 100-micron and 200-micron layer resolutions on FDM printers and found this one is the best.
Diameter Tolerances: Cheap filament usually extruded at lighter tolerances and with materials of questionable origin. For 1.75mm and 3mm filament, the outer diameter should not exceed +/- 0.1mm, for example,+/-0.05mm is OK. Anything over these tolerances could jam the extruder of the nozzles inner chamber, which is machined to exacting tolerances.
Additionally, the use of out of tolerance filament will cause over or under extrusion, which is the major cause of blobbing and voids in the finished print. This is because the slicing software used to prepare the style for printing calculates exactly how fast to extrude based on a constant filament size. Our filament quality is very good with tolerances: +/-0.02mm.
Air Bubbles: Moisture laden ABS will tend to bubble and spurt from the tip of the nozzle when printing; reducing the visual quality of the part, part accuracy, strength and introducing the risk of a stripping or clogging in the nozzle. Our ABS filaments DO NOT have air bubbles.
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings. Our products will enhance your experience to unparalleled inspiration.
SODIALRNew 3D Printer Filament ABS/PLA 1.75mm/3.0mm for 3D Printer 1kg/2.2lbs Material:PLA Size:1.75mm Color:Silver
PLA is a common type of biodegradable filament often derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. PLA is available in hard or soft grade and can be extruded at a low nozzle temperature. PLA allows higher print speed, more accurate placement of material with proper cooling it does not shrink as much and also thinner build heights because of less resistance from the plastic coming out the nozzle, where abs even at high temps 252C is still sticky and has high viscosity. PLA has a obvious feature that its translucent.
1. Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc.
2. Avaliable in both 1.75mm and 3.00mm diameter. Filament Diameter Tolerances: +/-0.02mm.
3. Air Bubbles: Zero!
4. All the filaments should be placed in dry and ventilated environment to keep. And PVA filament should be kept in sealed.
Material: PLA
Print Temp: 190-220 Celsius 374-428 Fahrenheit
Baseplate Temp: No heat
Diameter: 1.75mm
Tolerance: +/-0.02mm
Net Weight: 1KG 2.2lbs
Gross Weight: 1.3KG2.9 lbs
Package includes:
1 x 3D printer filament
1 x leather box
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.

Helpful?
Filament - SODIALRNew 3D Printer Filament ABS/PLA 1.75mm/3.0mm for 3D Printer 1kg/2.2lbs Material:PLA Size:1.75mm Color:Silver
Stats Overview
4.0 (1 Rate)
5
0%
rates
4
100%
rates
3
0%
rates
2
0%
rates
1
0%
rates
Add Your Rate:
Reviews (1):
CamRate - Business
Original Reviewer
Filament - SODIALRNew 3D Printer Filament ABS/PLA 1.75mm/3.0mm for 3D Printer 1kg/2.2lbs Material:PLA Size:1.75mm Color:Silver
4 years ago

https://www.amazon.co.uk/Filament-SODIAL-Printer-1-75mm-Material-Silver/dp/B01LXLSU0O?SubscriptionId=AKIAIS3I5A33GTV7S27Q&tag=wwwcamratecom-21&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B01LXLSU0O This is the best filament on the market. The 1.75mm filament holds a diameter tolerance of 0.02mm/0.0008 which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1kg 2.2lb reel. We tested many filaments at both 100-micron and 200-micron layer resolutions on FDM printers and found this one is the best.
Diameter Tolerances: Cheap filament usually extruded at lighter tolerances and with materials of questionable origin. For 1.75mm and 3mm filament, the outer diameter should not exceed +/- 0.1mm, for example,+/-0.05mm is OK. Anything over these tolerances could jam the extruder of the nozzles inner chamber, which is machined to exacting tolerances.
Additionally, the use of out of tolerance filament will cause over or under extrusion, which is the major cause of blobbing and voids in the finished print. This is because the slicing software used to prepare the style for printing calculates exactly how fast to extrude based on a constant filament size. Our filament quality is very good with tolerances: +/-0.02mm.
Air Bubbles: Moisture laden ABS will tend to bubble and spurt from the tip of the nozzle when printing; reducing the visual quality of the part, part accuracy, strength and introducing the risk of a stripping or clogging in the nozzle. Our ABS filaments DO NOT have air bubbles.
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings. Our products will enhance your experience to unparalleled inspiration.
SODIALRNew 3D Printer Filament ABS/PLA 1.75mm/3.0mm for 3D Printer 1kg/2.2lbs Material:PLA Size:1.75mm Color:Silver
PLA is a common type of biodegradable filament often derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. PLA is available in hard or soft grade and can be extruded at a low nozzle temperature. PLA allows higher print speed, more accurate placement of material with proper cooling it does not shrink as much and also thinner build heights because of less resistance from the plastic coming out the nozzle, where abs even at high temps 252C is still sticky and has high viscosity. PLA has a obvious feature that its translucent.
1. Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc.
2. Avaliable in both 1.75mm and 3.00mm diameter. Filament Diameter Tolerances: +/-0.02mm.
3. Air Bubbles: Zero!
4. All the filaments should be placed in dry and ventilated environment to keep. And PVA filament should be kept in sealed.
Material: PLA
Print Temp: 190-220 Celsius 374-428 Fahrenheit
Baseplate Temp: No heat
Diameter: 1.75mm
Tolerance: +/-0.02mm
Net Weight: 1KG 2.2lbs
Gross Weight: 1.3KG2.9 lbs
Package includes:
1 x 3D printer filament
1 x leather box
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.

Reply‚óŹ
Helpful?
User Image