Stepper Motor, Quimat Nema 17 Stepper Motor Bipolar 2A 64oz.in0.45Nm 38mm Body 4-lead w/ 1m Cable & Connector and Mounting Bracket Kit for 3D Printer Hobby CNC

NEMA-17 Stepper Motor 64 0.45 Nm 38mm Body 1.8 degree with 1M 4-pin Cable and Mounting Bracket Kit DIY 3D Printer CNC Robot.
1m wire, one connect electrical machine, on the other end has variety optional ports; heat shrink tubing effect to prevent the wire tangled up.
90 Degree Mounting Bracket with M3 screws.
64 0.45Nm Holding Torque.
1.8 degree step angle 200 steps/rev.
Stepper motor Specification:
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg
Holding Torque: 0.45Nm64
Rated Current/phase: 2.0A
Frame Size: 41 x 41mm
Body Length:38mm
Shaft Length: 22mm
Weight: 380g

Mounting Bracket Kit Specification:
NEMA 17 Mounting Bracket - 90 degrees
- M3 Screws Included 4
- Mounting Holes: 31mm center-to-center
- Max Collar Diameter: 22mm
- Powder-coated steel
- Nema17 Standard

Package Including:
1 x Nema 17 stepper motor
1 x 1m Cable & Connector
1 x Nema 17 Stepper Motor Mounting Bracket
4 x M3 Screws

Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Helpful?
Stepper Motor, Quimat Nema 17 Stepper Motor Bipolar 2A 64oz.in0.45Nm 38mm Body 4-lead w/ 1m Cable & Connector and Mounting Bracket Kit for 3D Printer Hobby CNC
Stats Overview
5.0 (1 Rate)
5
100%
rates
4
0%
rates
3
0%
rates
2
0%
rates
1
0%
rates
Add Your Rate:
Reviews (1):
CamRate - Business
Original Reviewer
Stepper Motor, Quimat Nema 17 Stepper Motor Bipolar 2A 64oz.in0.45Nm 38mm Body 4-lead w/ 1m Cable & Connector and Mounting Bracket Kit for 3D Printer Hobby CNC
3 years ago

https://www.amazon.co.uk/Stepper-Quimat-Bipolar-Connector-Mounting/dp/B06XRC93SZ?SubscriptionId=AKIAIS3I5A33GTV7S27Q&tag=wwwcamratecom-21&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B06XRC93SZ NEMA-17 Stepper Motor 64 oz.in 0.45 Nm 38mm Body 1.8 degree with 1M 4-pin Cable and Mounting Bracket Kit DIY 3D Printer CNC Robot.
1m wire, one connect electrical machine, on the other end has variety optional ports; heat shrink tubing effect to prevent the wire tangled up.
90 Degree Mounting Bracket with M3 screws.
64 oz.in 0.45Nm Holding Torque.
1.8 degree step angle 200 steps/rev.
Stepper motor Specification:
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg
Holding Torque: 0.45Nm64 oz.in
Rated Current/phase: 2.0A
Frame Size: 41 x 41mm
Body Length:38mm
Shaft Length: 22mm
Weight: 380g

Mounting Bracket Kit Specification:
NEMA 17 Mounting Bracket - 90 degrees
- M3 Screws Included 4
- Mounting Holes: 31mm center-to-center
- Max Collar Diameter: 22mm
- Powder-coated steel
- Nema17 Standard

Package Including:
1 x Nema 17 stepper motor
1 x 1m Cable & Connector
1 x Nema 17 Stepper Motor Mounting Bracket
4 x M3 Screws

Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Reply‚óŹ
Helpful?
User Image