PrimaFil PEI Sheet - 254x254mm - 2mm

PEI is easily cut to size by scoring with a hobby knife. Laminate your sheet of PEI using 3M 468MP Adhesive Transfer Tape that came with the PEI sheet to a glass/mirror print bed, keeping in mind that 3M 468MP is a very sticky tape that is prone to clumping.
Parts should come free from the surface with almost no issue at all. PLA does not require heat, but turning the heated bed up to 45C helps. After the print is done, just let the plate cool down and then gently you can just pop the model off the plate.
Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
Use isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use. In other words, PEI can be cleaned through the use of Isopropyl Alcohol, which will theoretically help adhesion should you lose it.
PEIPolyetherimide from Prima Filaments, also known as Ultem, is a reusable, relatively maintenance free, build surface for bothABSwith aHeated bed andPLAhot or cold, other materials such as Metal, Wood, PETG, ABS+ and many others also works just fine. You dont require any additional adhesives such as glue or tape. PEI is appealing due to its no-surface-prep conditions, which make it convenient to work with. Additionally, printing on PEI requires no support rafts as parts adhere directly to the surface with no issue.

How To Use.
PEI is easily cut to size by scoring with a hobby knife. Laminate your sheet of PEI using 3M 468MPAdhesive Transfer Tape that came with the PEI sheet to a glass/mirror print bed, keeping in mind that 3M 468MP is a very sticky tape that is prone to clumping. Once you have laminated your sheet of PEI onto your glass, simply re-level your print bed and print away. Parts should come free from the surface with almost no issue at all. PLA does not require heat, but turning the heated bed up to 45C helps. After the print is done, just let the plate cool down and then gently you can just pop the model off the plate.
Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
Use isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use. In other words, PEI can be cleaned through the use of Isopropyl Alcohol, which will theoretically help adhesion should you lose it.

Helpful?
PrimaFil PEI Sheet - 254x254mm - 2mm
Stats Overview
4.0 (1 Rate)
5
0%
rates
4
100%
rates
3
0%
rates
2
0%
rates
1
0%
rates
Add Your Rate:
Reviews (1):
CamRate - Business
Original Reviewer
PrimaFil PEI Sheet - 254x254mm - 2mm
3 years ago

https://www.amazon.co.uk/PrimaFil-PEI-Sheet-254x254mm-2mm/dp/B072575ZC9?psc=1&SubscriptionId=AKIAIS3I5A33GTV7S27Q&tag=wwwcamratecom-21&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B072575ZC9 PEI is easily cut to size by scoring with a hobby knife. Laminate your sheet of PEI using 3M 468MP Adhesive Transfer Tape that came with the PEI sheet to a glass/mirror print bed, keeping in mind that 3M 468MP is a very sticky tape that is prone to clumping.
Parts should come free from the surface with almost no issue at all. PLA does not require heat, but turning the heated bed up to 45C helps. After the print is done, just let the plate cool down and then gently you can just pop the model off the plate.
Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
Use isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use. In other words, PEI can be cleaned through the use of Isopropyl Alcohol, which will theoretically help adhesion should you lose it.
PEIPolyetherimide from Prima Filaments, also known as Ultem, is a reusable, relatively maintenance free, build surface for bothABSwith aHeated bed andPLAhot or cold, other materials such as Metal, Wood, PETG, ABS+ and many others also works just fine. You dont require any additional adhesives such as glue or tape. PEI is appealing due to its no-surface-prep conditions, which make it convenient to work with. Additionally, printing on PEI requires no support rafts as parts adhere directly to the surface with no issue.

How To Use.
PEI is easily cut to size by scoring with a hobby knife. Laminate your sheet of PEI using 3M 468MPAdhesive Transfer Tape that came with the PEI sheet to a glass/mirror print bed, keeping in mind that 3M 468MP is a very sticky tape that is prone to clumping. Once you have laminated your sheet of PEI onto your glass, simply re-level your print bed and print away. Parts should come free from the surface with almost no issue at all. PLA does not require heat, but turning the heated bed up to 45C helps. After the print is done, just let the plate cool down and then gently you can just pop the model off the plate.
Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
Use isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use. In other words, PEI can be cleaned through the use of Isopropyl Alcohol, which will theoretically help adhesion should you lose it.

Reply‚óŹ
Helpful?
User Image