Motor Drive Shield Stepper und Servo Treiber L293D fr Arduino Uno Duemilanove

2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!
Can drive 4 DC motors or 2 stepper motors or 2 Servo
Up to 4 bi-directional DC motors with individual 8-bit speed selection
Up to 2 stepper motors unipolar or bipolar with single coil, double coil or interleaved stepping
4 H-Bridges: per bridge provides 0.6A 1.2A peak current with thermal protection, can run motors on 4.5V to 36V DC
- 2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!
- Can drive 4 DC motors or 2 stepper motors or 2 Servo
- Up to 4 bi-directional DC motors with individual 8-bit speed selection
- Up to 2 stepper motors unipolar or bipolar with single coil, double coil or interleaved stepping
- 4 H-Bridges: per bridge provides 0.6A 1.2A peak current with thermal protection, can run motors on 4.5V to 36V DC
- Pull down resistors keep motors disabled during power-up
- reset button
- 2 external terminal power interface, for seperate logic/motor supplies
- Tested compatible for Mega, Diecimila & Duemilanove

Helpful?
Motor Drive Shield Stepper und Servo Treiber L293D fr Arduino Uno Duemilanove
Stats Overview
3.0 (1 Rate)
5
0%
rates
4
0%
rates
3
100%
rates
2
0%
rates
1
0%
rates
Add Your Rate:
Reviews (1):
CamRate - Business
Original Reviewer
Motor Drive Shield Stepper und Servo Treiber L293D fr Arduino Uno Duemilanove
3 years ago

https://www.amazon.co.uk/Shield-Stepper-Treiber-Arduino-Duemilanove/dp/B01MY4JZ03?SubscriptionId=AKIAIS3I5A33GTV7S27Q&tag=wwwcamratecom-21&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B01MY4JZ03 2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!
Can drive 4 DC motors or 2 stepper motors or 2 Servo
Up to 4 bi-directional DC motors with individual 8-bit speed selection
Up to 2 stepper motors unipolar or bipolar with single coil, double coil or interleaved stepping
4 H-Bridges: per bridge provides 0.6A 1.2A peak current with thermal protection, can run motors on 4.5V to 36V DC
- 2 interface for 5V Servo connected to the high-resolution dedicated timer - no jitter!
- Can drive 4 DC motors or 2 stepper motors or 2 Servo
- Up to 4 bi-directional DC motors with individual 8-bit speed selection
- Up to 2 stepper motors unipolar or bipolar with single coil, double coil or interleaved stepping
- 4 H-Bridges: per bridge provides 0.6A 1.2A peak current with thermal protection, can run motors on 4.5V to 36V DC
- Pull down resistors keep motors disabled during power-up
- reset button
- 2 external terminal power interface, for seperate logic/motor supplies
- Tested compatible for Mega, Diecimila & Duemilanove

Reply‚óŹ
Helpful?
User Image